Innokin Klypse Zip Kit

Innokin Klypse Zip Kit: Simple, Draw-Activated MTL Vaping

Quick verdict: the Innokin Klypse Zip Kit is a compact, refillable MTL (mouth-to-lung, a tight cigarette-like draw) pod kit with a 650mAh battery, USB-C charging and a fixed 1.2Ω mesh coil. There are no buttons and no settings: you fill the pod, inhale, and it fires. Best for new switchers who want the simplest possible refillable vape. Not ideal if you want big clouds, adjustable power or a long battery between charges.

The Klypse Zip is the most stripped-back device in Innokin's Klypse family. Where the Klypse Mecha adds a screen and controls, the Zip removes everything but the essentials. That makes it one of the easiest vapes to pick up if you have just moved off disposables and do not want to learn ohms, wattage or airflow rings.

Innokin Klypse Zip Specifications

Pick Your Draw: MTL Only

The Klypse Zip is built for one style: a tight MTL draw that feels close to a cigarette. There is no airflow control and no direct-to-lung option, which keeps it foolproof. If you have only ever used a disposable bar, this is the same tight inhale you already know, just refillable and far cheaper to run.

Key Features

• Draw-activated firing so there is no button to press. Inhale and it works.
• Fixed 1.2Ω mesh coil for a warm, flavour-focused MTL vape.
• USB-C charging tops the 650mAh battery up quickly, not the slow older Micro-USB.
• Side-fill pod makes refilling quick and low-mess.
• Pocket-sized, button-free body in eight colours for easy carry.

Pods and E-Liquid Pairing

The coil is built into the pod, so when the flavour fades you replace the whole pod rather than a separate coil. You need the Innokin Klypse Replacement Pods to restock, and the same pods are shared across the Klypse range.

Because the 1.2Ω coil is a higher-resistance MTL coil, pair it with thinner, PG-based juice: a 50/50 e-liquid or a 10ml nic salt. Avoid thick high-VG shortfills, which will not wick properly and can cause dry, burnt hits. When you fit a fresh pod, prime it: let it sit filled for five minutes before the first draw.

Battery, Pod Life and Running Cost

The 650mAh battery is sized for a pocket, so a light-to-moderate vaper gets most of a day before a recharge, and USB-C means top-ups are fast. Heavy vapers will want a charge partway through the day.

A pod typically lasts around a week of normal use, though sweeter and darker juices clog coils faster. Restocking pods and juice still costs a fraction of buying disposables, which is the real saving: you replace a small pod, not the whole device.

Compatibility and Refills

The Klypse Zip takes Innokin Klypse replacement pods, which it shares with the wider Klypse range, so pods are easy to find and cheap to stock. Refilling is done through the side-fill port on the pod: lift the stopper, fill down the side, and replace it. There is no separate coil to change and no airflow ring to set, which is the whole point of this kit.

What's in the Box

• 1 x Innokin Klypse Zip device
• 1 x 2ml refillable pod (1.2Ω, pre-installed)
• 1 x USB-C charging cable
• 1 x user manual

Switching from Disposables?

If you have come off disposable bars, the Klypse Zip is one of the easiest refillables to start with. The draw-activated firing means it behaves like a disposable, the tight MTL draw feels familiar, and the only new habit is refilling a 2ml pod and swapping it every week or so. You keep the same inhale, lose the throwaway cost, and choose your own flavour and nicotine strength. Compare it with more MTL vape kits for beginners or the full Innokin vape kit range.

Innokin Klypse Zip FAQ

Which pods does the Innokin Klypse Zip use?

It uses Innokin Klypse replacement pods, with the 1.2Ω mesh coil built into the pod. The same pods are shared across the Klypse range, so they are easy to restock. There is no separate coil to buy or fit.

Is the Klypse Zip button or draw activated?

It is fully draw-activated, so there is no fire button. You simply inhale and the device fires. This makes it one of the simplest refillable kits to use, especially if you are switching straight from a disposable.

What e-liquid should I use in the Klypse Zip?

Use 50/50 e-liquid or nic salts. The 1.2Ω coil is a higher-resistance MTL coil made for thinner, PG-based juice. Avoid high-VG shortfills, which are too thick to wick and lead to dry, burnt-tasting hits.

How do I fill the Klypse Zip pod?

Fill through the side port on the pod. Lift the silicone stopper, add your e-liquid down the side, then close it. With a new pod, let it sit filled for about five minutes before vaping so the coil soaks properly.

How long does the battery last?

The 650mAh battery covers most of a day for a light-to-moderate vaper. Heavier users may need a top-up partway through. Charging is over USB-C, which is quick, and a full charge takes well under an hour.

Why is my Klypse Zip leaking or spitting?

Usually it is an over-filled pod, a pod that was not primed, or juice that is too thin. Fill just below the top, let a new pod sit five minutes before use, stick to 50/50 juice, and take slow, steady draws.