Oxva Replacement Pods | Top Fill And Side Fill

Pod gone burnt or started weeping? You are in the right place. At Vape Online Store we stock the full range of Oxva vape pods and Oxva pod cartridges, from the Xlim cartridges that fit most of the Xlim family right through to Nexlim, VPrime, ONEO and Origin. Every Oxva replacement pod here is a genuine Oxva part, and every one is refillable, so you pick your own e-liquid.

Quick heads-up: every Oxva vape uses its own pod family, and Oxva is not one pod that fits everything. Xlim, Nexlim, VPrime, ONEO and Origin are separate pod families, and a pod from one will not seat in another. Check the name printed on your device before you order.

Key Facts

• Oxva replacement pods are refillable cartridges that are filled by the user, not prefilled.
• Every Oxva pod sold in the UK holds 2ml of e-liquid, the maximum allowed under UK TPD rules.
• Oxva pods are made in resistances from 0.2ohm to 1.2ohm.
• Oxva Xlim V3 pods fit the Oxva Xlim Pro, Oxva Xlim Pro 2, Xlim Pro 3, Xlim Classic, Xlim Go and Xlim SQ Pro 2.
• Oxva Xlim V3 pods do not fit the Oxva Xlim C, which uses a dedicated cartridge.
• Oxva Xlim, Nexlim, VPrime, ONEO and Origin pods are separate pod families and are not interchangeable.
• An Oxva pod lasts five to ten refills, or roughly five to seven days of normal use.
• Oxva pods at 0.8ohm and 1.2ohm suit nic salt, and Oxva pods at 0.2ohm to 0.6ohm suit low-strength freebase e-liquid.
• The Oxva Xlim V3 pod replaced the Oxva Xlim V2 pod by moving the fill port from the side to the top, and both fit the same Xlim kits.

1. Oxva Xlim V3 (Top Fill) Replacement Pod Cartridges

£8.99 • Pack of 3

🔥 Best Seller

The Oxva Xlim V3 replacement pods are the current Xlim top fill pods and the ones most Xlim owners want. Sold as Oxva Xlim pods 3 pack, they are the default Oxva Xlim Pro pods for every current Pro kit. Each holds 2ml, runs a built-in mesh coil, and fills from a port on the top rather than the side, which is the single biggest improvement over the old V2. Four resistances cover everything from a tight cigarette draw to a loose restricted lung hit.

Who's it for? Anyone running an Oxva Xlim Pro, Oxva Xlim Pro 2, Xlim Pro 3, Xlim Classic, Xlim Go or Xlim SQ Pro 2. It is the default choice for most Xlim vape kits sold today.

Resistances: 0.4ohm (26-30W, RDL), 0.6ohm (20-25W, RDL), 0.8ohm (12-18W, MTL), 1.2ohm (10-12W, MTL).

💡 Pro Tip: V3 pods fit every device a V2 fitted, so there is no reason to hunt down old V2 stock. The one exception is the Xlim C, which uses its own cartridge entirely.

• Capacity: 2ml, TPD compliant
• Fill: Top fill, anti-leak
• Coil: Built-in mesh
• Fits: Oxva Xlim Pro / Oxva Xlim Pro 2 / Xlim Pro 3 / Xlim Classic / Xlim Go / Xlim Go 2 / Go Lite / Xlim SQ Pro 2 / Xlim 3 Ultra
• Does not fit: Xlim C

View Product

2. Oxva Xlim V2 (Side Fill) Replacement Pods

£8.99 • Pack of 3

The Oxva Xlim V2 pods are the original side-fill cartridge, filled by easing out a rubber stopper on the side. Same 2ml capacity and same mesh coil as the V3, but three resistances rather than four and no 0.4ohm option. Still a solid pick if you have settled on a resistance and just want spares.

Who's it for? Xlim, Xlim SE, SE 2, SQ, SQ Pro and Classic owners who prefer the side-fill design.

Resistances: 0.6ohm (20-25W, RDL), 0.8ohm (12-16W, MTL), 1.2ohm (10-12W, MTL).

💡 Pro Tip: Push the side stopper fully home after filling. A stopper sitting slightly proud is the most common cause of a pod that looks like it is leaking when it is not.

• Capacity: 2ml, TPD compliant
• Fill: Side fill, rubber stopper
• Coil: Built-in mesh
• Fits: Xlim / Xlim SE / SE 2 / Xlim SQ Pro / Oxva Xlim Pro / Oxva Xlim Pro 2 / Xlim Classic / Xlim Go
• Does not fit: Xlim C

View Product

3. Oxva Nexlim Replacement Pods

£8.99 • Pack of 3

🔥 Newest Range

The Oxva Nexlim pods fit the Nexlim range and nothing else. What sets them apart is the colour-coded base: black for 0.6ohm, orange for 0.8ohm, green for 1.2ohm. If you keep a couple of resistances on the go, you can tell them apart at a glance instead of squinting at tiny print.

Who's it for? Oxva Nexlim, Nexlim 2 and Nexlim 2 Mini owners. Most people should start on the 0.8ohm for everyday MTL, or 0.6ohm if you want it warmer.

Resistances: 0.6ohm (RDTL), 0.8ohm (RDTL and MTL), 1.2ohm (MTL).

💡 Pro Tip: The 0.8ohm is the one to start with. It handles a tight MTL pull and opens up to a restricted lung draw, so you can find your preference without buying two packs.

• Capacity: 2ml, TPD compliant
• Coil: Built-in mesh
• Design: Colour-coded bases by resistance
• Fits: Oxva Nexlim range only
• Does not fit: Any Xlim, VPrime, ONEO or Origin device

View Product

4. Oxva VPrime Replacement Pods

£7.99 • Pack of 2

🔥 Widest Draw Range

The Oxva VPrime pods cover more ground than any other pod on this page. The range runs from a 0.2ohm direct-lung XL pod right down to a 0.8ohm MTL XL, so the same device can give you a tight cigarette pull one week and proper clouds the next. The VPrime kit pushes up to 60W, which is what makes the low-ohm options usable.

Who's it for? VPrime owners who want one device that covers both MTL and direct lung. If you are unsure, the 0.4ohm is the safest first buy across the whole Oxva VPrime pods range.

Resistances: 0.2ohm (DTL XL), 0.4ohm (RDTL XL), 0.6ohm (RDTL XL and standard 2ml), 0.8ohm (MTL XL).

💡 Pro Tip: Match the e-liquid to the ohm, not the other way round. The 0.2ohm and 0.4ohm want low-strength freebase; put 20mg nic salt through a 0.2ohm and it will be genuinely unpleasant.

• Capacity: 2ml, TPD compliant
• Coil: Built-in mesh
• Draw styles: MTL, RDTL and DTL depending on resistance
• Fits: Oxva VPrime range only
• Does not fit: Any Xlim, Nexlim, ONEO or Origin device

View Product

5. Oxva ONEO Replacement Pod Cartridges

£8.99 • Pack of 3

The Oxva ONEO pods are the dedicated cartridge for the ONEO kit, holding 2ml behind a built-in mesh coil. Three resistances, all sitting in restricted-lung and mouth-to-lung territory, which suits the ONEO's mid-power output rather than trying to be a cloud machine.

Who's it for? Oxva ONEO kit owners.

Resistances: 0.4ohm (RDL), 0.6ohm (RDL), 0.8ohm (MTL).

💡 Pro Tip: New pod, new routine: fill it, then leave it standing five minutes before the first draw. Mesh coils in small pods burn on puff one if the cotton has not soaked.

• Capacity: 2ml, TPD compliant
• Coil: Built-in mesh
• Draw styles: RDL at 0.4-0.6ohm, MTL at 0.8ohm
• Fits: Oxva ONEO range only
• Does not fit: Any Xlim, Nexlim, VPrime or Origin device

View Product

6. Oxva Xlim EZ Replacement Pods

£8.99 • Pack of 3

The Oxva Xlim EZ pods belong to the Xlim EZ kit, the simplest device in the Xlim line. Despite the shared Xlim name these are their own cartridge, so do not assume a V2 or V3 will drop in. Four resistances give the EZ more range than the kit's straightforward reputation suggests.

Who's it for? Oxva Xlim EZ kit owners, and anyone after a fuss-free refillable setup.

Resistances: 0.4ohm, 0.6ohm, 0.8ohm and 1.2ohm.

💡 Pro Tip: The Xlim EZ is one of the easiest kits to hand someone coming off cigarettes. Pair a 1.2ohm pod with 20mg nic salt and the draw lands very close to a cigarette.

• Capacity: 2ml, TPD compliant
• Coil: Built-in Oxva mesh coil
• Range: Four resistances, 0.4ohm to 1.2ohm
• Fits: Oxva Xlim EZ kit
• Does not fit: Standard Xlim kits that take V2 or V3 cartridges

View Product

7. Oxva Origin X Replacement XL Pods

£2.99

🔥 Best Budget

The Oxva Origin X pods are the cheapest way back into a working device on this page. The Origin X is an older pod-mod that takes Oxva's Unicoil system, so the pod is a shell you drop a coil into rather than a sealed cartridge. That is why it costs a third of what the Xlim pods do.

Who's it for? Oxva Origin X owners, and anyone who prefers swapping a cheap coil to binning a whole pod.

Worth knowing: because the coil is separate, running costs over a year are lower than any sealed cartridge here.

💡 Pro Tip: Keep one spare pod shell and a few coils rather than several shells. The shell rarely fails; it is the coil that wears out.

• Capacity: 2ml, TPD compliant
• Type: XL pod shell, takes a separate coil
• Value: Lowest running cost in the Oxva range
• Fits: Oxva Origin X
• Does not fit: Xlim, Nexlim, VPrime or ONEO devices

View Product

Quick Comparison: Which Oxva Pod Fits Your Device?

Nine cartridges, five separate pod families. Here they are side by side.

Which Oxva Replacement Pod Should You Actually Pick?

What This Category Actually Covers

This page covers refillable Oxva replacement pods, the empty cartridges you fill with your own e-liquid. That is the opposite of the prefilled pods on our replacement vape pods page, which arrive filled and ready. With Oxva you choose the liquid, which is cheaper over time and gives you every flavour on the market rather than the handful a brand decides to make.

Buying the right Oxva vape pod comes down to two questions: which pod family does your device belong to, and which resistance suits the way you vape. Get the first one wrong and the pod will not seat at all, whether you run an Xlim vape or one of the newer ranges.

How To Pick Your Resistance

Resistance decides the draw, the power and the e-liquid that will work. Higher ohm means a tighter, cooler, more cigarette-like pull on less power; lower ohm means a looser, warmer, more airy draw on more power.

Battery life follows the same line. An Xlim Go 2 on 0.8ohm pods will see out a full day, while the same kit on 0.6ohm at nearly double the wattage often wants a top-up by the evening.

Which E-Liquid Goes In An Oxva Pod

Every pod on this page is refillable, so the e-liquid is your call, but the resistance narrows it. At 0.8ohm and 1.2ohm you want a 50/50 blend or nic salt; that ratio is thin enough to wick through a tight coil. Drop to 0.4ohm or 0.6ohm and higher-VG liquid becomes usable, and nicotine strength should come down as vapour goes up.

Get this backwards and you will notice. Thick high-VG liquid in a 1.2ohm pod starves the wick and tastes burnt within a day, and 20mg salt in a 0.2ohm pod is harsh enough that most people put the device down.

Why Oxva Pods Do Not Swap Between Kits

Oxva builds each range around its own pod shape and contact layout. Xlim, Nexlim, VPrime, ONEO and Origin are genuinely separate systems, so a Nexlim pod will not seat in an Xlim no matter how similar the resistance looks on the box. The one place there is real crossover is within the Xlim family, where Xlim vape pods in both V2 and V3 form fit the same kits and V3 has simply replaced V2 over time.

Our Recommendations By Device

• Oxva Xlim Pro, Xlim Pro 2, Xlim Pro 3, Xlim Classic, Xlim Go or Xlim SQ Pro owners: Xlim V3 top fill pods, 0.8ohm to start.
• Older Xlim, SE or SQ owners: Xlim V2 side fill pods, or move to V3 for the easier fill.
• Xlim Pro 2 DNA owners: the stainless steel Xlim SS pods.
• Xlim C owners: the Xlim C cartridge only. Nothing else in the Xlim range fits.
• Xlim EZ owners: Xlim EZ pods, which are their own cartridge despite the name.
• Nexlim owners: Nexlim pods, 0.8ohm for the most flexible draw.
• VPrime owners: VPrime pods, 0.4ohm as the safest first buy.
• ONEO owners: ONEO cartridges, 0.8ohm for MTL or 0.6ohm for RDL.
• Origin X owners: Origin X XL pods, the cheapest running cost here.

Why Vape Online Store Is Trusted For Oxva Pods

Every Oxva pod we sell is a genuine Oxva part bought through authorised UK supply, not a copy. Counterfeit pods are a real problem in this category and they fail in the ways that matter: coils that burn in a day, seals that weep, contacts that do not read.

Fast UK dispatch, easy returns, and clear compatibility on every listing so you order the right cartridge first time. Vape Online Store is strictly 18+.

Oxva Pod Troubleshooting: Leaks, Burnt Taste And Pods That Will Not Fire

Most problems people blame on the device are actually the pod. These are the fixes that work.

Oxva Xlim Not Working Or Not Hitting

Four checks clear most of it. Charge the device, pull the pod and reseat it until it clicks, make sure the device is not locked, and wipe the contact pins with a dry cotton bud. If it still will not fire, try a fresh cartridge, because one dead contact plate on a pod is far more common than a dead battery.

Oxva Xlim Leaking, Gurgling Or Spitting

Gurgling is flooding, not a fault. Too much liquid, a fill bung that is not seated, or a draw that is too hard will all do it. Leave a little headroom when you fill, push the bung fully home and pull gently. If liquid starts appearing around the fill port or on top of the battery on a pod that was fine last week, the coil is on its way out.

When To Replace An Oxva Pod

Change the pod every five to seven days on normal use. Swap it sooner if a burnt taste survives a fresh fill, if it leaks repeatedly, if flooding will not clear, or if the auto-draw starts firing unreliably. A burnt taste is almost always the coil failing to stay saturated for how hard the device is being used.

Frequently Asked Questions — Oxva Replacement Pods

Ready to Restock? Find Your Oxva Pod Today

Whether you run an Xlim, Nexlim, VPrime, ONEO or Origin, keeping a spare pack of Oxva replacement pods at home means a burnt coil never costs you a day. Check the name on your device, pick the resistance that matches your draw, and you are sorted.

Browse the full range of Oxva pods above, or head back to our wider replacement pods range if you are shopping for another brand.

✅ TPD Compliant: Every Oxva pod in this collection holds 2ml and meets UK regulations. Since the 1 June 2025 disposable ban, devices must be rechargeable and refillable — refillable pod systems like Oxva are exactly what the rules were written for.