Freemax Twister Coils Cheap | Pack Of 5

Specifications:

• Pack Size: Supplied in a Pack of 5
• Coil Resistance : 0.12ohm, 0.15ohm, 0.2ohm, 0.5ohm
• Flax and cotton wicking.
• Designed for use with the Freemax Twister kit in the Fireluke 2 tank.

The Freemax Fireluke 2 coils are viable with your Twister Coils By Freemax and both the first Fireluke mesh and the Fireluke 2 Sub-Ohm Tank, these coils use a cross section warming component. With a wide contact surface and even intensity, these coils were worked for some character. Now the Twister Coils By Freemax has smaller diameter than the Fireluke Coils, which means that these coils will work on any atomizer with a 510.1 connection.

If your device is 510 type and has a Sub-Ohm Tank, you can use the Freemax Fireluke 2 Coils on your setup. These coils have a tightly wrapped length and wide contact surface as well as an even high wattage rating across the board. The result is a great flavor and healthy clouds, which are ideal for use on one of my favorite setups.

These Twister Coils By Freemax  are intended to be used for variable wattage and have been pre-installed on the Freemax Fireluke 2 Sub-Ohm Tank. If you are looking for a great rebuildable dripping tank, you must check out the Fireluke 2 Sub-Ohm Tank Kit, as well as the Fireluke 2 Drip Tips. The coils were oreinstalled on the Freemax Fireluke 2 Tank, therefore these coils can be used with variable watt settings

• The X1 coils feature a 0.15 Ohm resistance and utilise a single Kanthal mesh coil build. These coils should be used between 40 - 90W.
• The X2 uses dual Kanthal mesh builds and registers a 0.2 Ohm resistance. These coils should be used between 40 - 80W.
• The X3 has three Kanthal mesh coil builds and features a 0.15 Ohm resistance. These coils should be used between 50 - 90W.
• The TX1 Mesh coils use a single Kanthal mesh build. Registering a 0.15 Ohm resistance, they should be used between 40 - 90W.
• The TX 2 coils feature a dual mesh build and a 0.2 Ohm resistance. We recommend using them between 40 - 80W for best results.
• The TX3 Mesh coils have a triple Kanthal mesh build. Registering a 0.15 Ohm resistance, they should be used between 50 - 90W.
• The TX4 Mesh coils utilise a quadruple Kanthal mesh build. Registering a 0.15 Ohm resistance, they should be used between 40 - 80W.
• The TX SS316L coils use a Stainless Steel mesh coil build so they can be used in Temperature Control and Variable Wattage mode. Registering a 0.12 Ohm resistance and can be used up to 60W.
• The TNX2 coils feature a dual Kanthal mesh coil build. Registering a 0.5 Ohm resistance, these coils can be used between 20 - 50W.
• The X4 coils utilise a quad mesh build and feature a 0.15 Ohm resistance for increased vapour production. We recommend using them between 40 - 80W