SMOK RPM80 RGC Replacement Coils | Pack Of 5

The SMOK RPM80 RGC replacement coils are the drop-in coils for SMOK's RGC pod, delivering SMOK's NexMesh flavour with a simple plug-and-play fit. This pack gives you a choice of two resistances: a 0.17Ω conical mesh coil for big, warm direct-lung (DTL) clouds and a 0.6Ω DC MTL coil for a tighter, cigarette-like mouth-to-lung draw. These SMOK RGC replacement coils fit the RGC pod used by the RPM80, RPM80 Pro and Fetch Pro, and are sold in packs of 5.

Key facts

• The SMOK RGC coils come in 0.17Ω mesh and 0.6Ω DC MTL.
• The 0.17Ω mesh coil runs at 40-80W.
• The 0.6Ω DC MTL coil runs at 8-16W.
• They use SMOK NexMesh with a Kanthal, plug-and-play build.
• They fit the SMOK RPM80, RPM80 Pro and Fetch Pro RGC pod.
• They are sold in packs of 5.

Which devices do SMOK RGC coils fit?

• Fits: the SMOK RPM80, RPM80 Pro and Fetch Pro, through the SMOK RGC replacement pod.
• Also fits: the same RGC pod takes the SMOK RGC RBA coil if you prefer to rebuild.
• Does not fit: the standard RPM pod (that takes SMOK RPM coils, not RGC), and not the TFV8 Baby or Nord, which use different coils.

SMOK RGC coil specifications

• Brand: SMOK
• Coil: RGC (NexMesh)
• Resistance: 0.17Ω conical mesh and 0.6Ω DC MTL
• Material: Kanthal
• Wattage: 0.17Ω at 40-80W; 0.6Ω at 8-16W
• Pack size: Pack of 5
• Fits: RPM80 / RPM80 Pro / Fetch Pro RGC pod
• Install: plug-and-play, with an authenticity sticker on the pack

Resistance, wattage and draw guide

Pick the coil by the draw you want. Use only the resistance your RGC pod is set up for, and match the e-liquid to it:

• 0.6Ω DC MTL (8-16W), tight mouth-to-lung: a cigarette-like draw for ex-smokers. Best with a 50/50 nic salt in 10mg or 20mg.
• 0.17Ω Conical Mesh (40-80W), airy direct-lung: warm clouds and bold flavour, with a sweet spot around 60W. Best with a high-VG (70/30 or more) shortfill at 0-6mg.

There is also an RGC RBA core (a pre-built 0.6Ω Clapton) for vapers who want to rebuild their own coil.

Which e-liquid to pair

For the 0.6Ω MTL coil, use a 50/50 or high-PG nic salt for a smooth throat hit. For the 0.17Ω mesh coil, switch to a high-VG shortfill e-liquid at a low nicotine level, as thick sub-ohm juice wicks best at high wattage and gives the biggest clouds.

Prime and protect your RGC coil

1. Prime: drip a few drops of e-liquid directly onto the coil's wick ports until they look saturated before fitting it.
2. Fill and rest: fit the coil into the RGC pod, fill, then leave it 5 to 10 minutes so the wick soaks fully.
3. Start low: begin the 0.17Ω around 40W and build up to about 60W rather than jumping straight to 80W, which is where the burnt taste tends to start.
4. Do not chain-vape: leave a moment between puffs so the wick can re-soak and avoid dry hits.
5. Lifespan: expect roughly 2 to 3 weeks per coil; keep the pod topped up, run high-VG juice and lower the wattage to make it last longer, then swap when it tastes burnt.

Vapers on the E-Cigarette Forum note the 0.17Ω RGC can dry-hit if pushed near 80W or on an off batch of SMOK's quality control, so keeping it around 40-65W with a high-VG juice is the reliable setup. If you want a tighter, trouble-free option, many prefer the RPM 0.4Ω coil instead.

Why NexMesh

The conical mesh heats evenly across a larger surface than a round wire coil, so you get fuller flavour and a longer usable life before the taste drops off.

Genuine SMOK coils from Vape Online Store

These are 100% genuine SMOK RGC coils, bought direct from the distributor and shipped with SMOK's authenticity sticker so you never risk a fake that burns out fast. We stock the full replacement vape coils range with fast, tracked UK delivery, for adult use only, 18+. Shop with confidence at Vape Online Store.

SMOK RGC coils FAQ