Horizon Tech Talons Starter Kit

gets you the device, a 0.6Ω mesh pod, a Type-C cable, and a manual. The horizon tech talons starter kit is draw-activated, top-fill, and genuinely compact — the kind of kit that disappears into a jacket pocket and stays there until you actually need it.

Introduction

Here's the full setup process: fill the pod, wait five minutes, inhale. That's it. No wattage to set, no button to hold, no menu buried three clicks deep.

The airflow ring on the side is the one thing worth spending ten seconds on before your first draw. Tighten it down and the draw gets restrictive — proper MTL, close to a cigarette. Open it and you're in RDTL territory, more air, more vapour. Where you set it is personal and there's no wrong answer, but it's worth knowing it's there rather than just leaving it wherever it shipped from.

Pod resistance is the other variable. Three options — 0.6Ω ships in the kit, 0.8Ω and 1.0Ω available separately. If you've just switched from smoking and the 0.6Ω feels too open and airy, the 1.0Ω is worth trying. It's a tighter, more focused draw and pairs better with higher-strength nic salt. Most people start on the 0.6Ω and stay there. Some don't.

Specs

Mesh coil rather than wire — that's worth noting because it's what keeps flavour consistent across the pod's lifespan rather than drifting off halfway through. Even heat distribution, no hot spots, no one side of the wick burning faster than the other. At the wattage range the horizon tech talons starter kit operates at, coil life is better than you'd expect from a starter kit at this price.

What It Does Well

• Draw-activated — no button, works on inhale
• Airflow ring that's actually adjustable, not decorative
• Top-fill with pressure exhaust — fill it upright, no liquid spitting back out the fill port
• Three pod resistance options for different draw preferences — all genuinely different in feel, not just on paper
• Type-C cable in the box. Actually in the box.
• Small and light — you'll forget it's in your pocket, which is the point

Setting It Up

Pod clicks into the device. Lift the top-fill cap, fill to 2ml, close it. Now leave it for five minutes before you draw on it — this part matters more than people give it credit for.

The cotton wick inside the 0.6Ω mesh coil is completely dry from the factory. It needs time to absorb e-liquid before the coil fires. Draw on it too early — even thirty seconds too early — and the heat hits a partially dry wick. That scorches the cotton. And scorched cotton in a vape coil doesn't recover. It tastes burnt on that draw and on every draw after it, right through to the end of the pod. A brand new pod, ruined before the second puff. Five minutes prevents that entirely.

After priming, set your airflow, inhale, done. The horizon tech talons starter kit fires on draw — no button press. For charging, Type-C cable into the base port, roughly an hour to 90 minutes from flat, three LEDs show progress.

Compatibility

Original Talons pods only — 0.6Ω, 0.8Ω, 1.0Ω. Not Talons TW pods. Not Talons 3. Not Talons 2. Those are different devices with different pod connections and different wattage ranges — the Talons TW runs at 32W, the Talons 3 at 40W, neither pod will seat properly in the horizon tech talons starter kit. When buying replacements, the listing should say "Talons" and nothing after it.

The Three Pod Options

0.6Ω — ships in the kit, RDTL draw, 20–25W range. Open enough to produce real vapour, restricted enough that it's not a lung hit. Where most people land and stay.

0.8Ω — MTL, tighter draw, 14–18W. Better for vapers who want something closer to a cigarette feel without going all the way to the most restrictive option. 20mg nic salt works well here.

1.0Ω — tightest of the three. Around 14W. If the 0.6Ω felt too airy when you first used the horizon tech talons starter kit — this is probably what you actually wanted. Less vapour, more focused hit, closest to smoking.

In the Box

Device. 0.6Ω pod with coil pre-installed. Type-C cable. Manual. E-liquid not included — for the 0.6Ω pod, 20mg nic salt in a 50/50 base is the right pairing.

Price

£9.99. Fast UK delivery from VapeOnlineStore.co.uk. Get a spare pod with it — not because the kit is unreliable, just because running out of pods on day two while waiting for delivery is a situation you can easily avoid for a couple of quid.

FAQs