Geekvape M Series Coils – Maximum Clouds for the Z Max Tank (Pack of 5)

If you have moved beyond the basic pod kits and you are now into the "cloud chasing" territory, you have probably heard of the Geekvape M Series coils. Let’s be real for a second—the "M" in M series actually stands for "Max." Geekvape didn't just throw that name on there for the sake of it. These are physically some of the biggest coils you will ever shove into a tank. They are designed for one thing and one thing only: massive, room-filling clouds and flavour that hits you like a freight train.

At Vape Online Store (VOS), we get people coming in all the time confused between the Z series and the M series. Here is the deal—if you have the standard Zeus tank, these won't fit. You need the Geekvape Z Max tank to run these beasts. If you try to force them into a regular Zeus, you’re going to have a proper bad day. But if you do have the Z Max, you’re in for a treat. These Geekvape M coils are the engine room of that tank. They are built with a massive surface area to vaporise juice faster than a thirsty V8 engine. Whether you are after a smooth 60W vape or a face-melting 100W hit, this 5-pack of coils is what stands between you and a mediocre vape.

The Lineup: Which M Series Coil is Your Match?

Geekvape didn't just give us one option and tell us to deal with it. They’ve dropped four different configurations, and each one changes the way your Z Max tank performs. It isn't just about the wattage; it’s about how that heat is distributed. Here is the raw breakdown from the shop floor

1. M 0.14Ω Single Mesh (60–80W): This is the classic "all-rounder" for the M series. It is a single, large mesh cylinder inside that provides a huge surface area. It heats up incredibly fast—no "ramp-up" time here. You hit the button and you get vapour instantly. It is best for those who want a reliable, punchy DTL (Direct-to-Lung) hit without pushing their batteries to the absolute limit. It’s consistent, it’s loud, and it tastes brilliant.
2. M 0.2Ω Triple Mesh (70–85W): Now we are getting fancy. The M 0.2 Triple Mesh has three separate heating elements inside. Why three? Because it splits the air and the juice across three points, which usually leads to a much richer, "layered" flavour. If you are vaping a complex juice—something with dessert, fruit, and cream notes—this coil is the one that’ll let you taste every bit of it. It’s slightly more restrictive than the single mesh but produces a much denser cloud.
3. M 0.3Ω Dual Mesh (55–65W): This is the "cool" choice. If you like a Direct-to-Lung hit but you don't want your vapour to be scorching hot, the 0.3Ω Dual Mesh is your best friend. It runs at a lower wattage range, which means your batteries will last longer and your juice won't disappear in five minutes. It’s perfect for those long sessions at the pub where you want the clouds but don't want to be hunting for a charger by 9 PM.
4. M 0.15Ω Quadra Mesh (85–100W): The absolute monster of the pack. Four mesh cores. Yes, four. The M 0.15 Quadra is for the hardcore cloud chasers who want to push their mod to the triple digits. It is incredibly thirsty—it’ll drink through a 2ml tank faster than you can say "refill"—but the vapour production is mental. If you want to disappear in a fog bank, this is the coil. Just make sure your mod can handle the 100W output without breaking a sweat.

Why M Series Mesh Tech Actually Works

We see a lot of "innovations" in vaping that are just marketing fluff. But mesh is different. In the old days, coils were just a piece of wire wrapped into a spring. They had "hot spots" where the juice would burn and "cold spots" where it wouldn't vaporise properly.

These M Series replacement coils use a honeycomb mesh grid. This grid heats up perfectly evenly. Because more of the juice-soaked cotton is touching the heating element at the same time, you get more vapour per puff. It also means the coils last longer because you aren't scorching one tiny bit of cotton while the rest stays wet. It’s efficient, it’s loud, and honestly, once you’ve vaped a Quadra mesh, it’s hard to go back to a standard wire coil.

Installation and The "Faff" Factor

Geekvape knows we hate messing about with screws and tools when we are on the go. These coils use a press-fit installation. You just unscrew the base of your tank, pull the old coil out (a pair of tweezers or a coil tool helps if it’s stuck), and push the new one in. No threading, no swearing, no leaks

Pro Tip from the VOS counter: Always check your O-rings. When you pull an old coil out, sometimes the little rubber ring stays behind. If you push a new coil in on top of an old ring, it won't seal properly and you’ll end up with 5ml of juice in your pocket. Not a good look, bruv.

Compatibility Check: Read This Before Buying

I cannot stress this enough—these coils only work in the Geekvape Z Max Tank.

• Do they fit the Zeus Sub-Ohm? No.
• Do they fit the Z Nano? No.
• Do they fit the Cerberus? No.

They are "Max" coils for a "Max" tank. If you bought an L200 Classic Kit, it probably came with the Z Max tank, so you’re golden. But if you have a standard Aegis Legend 2 (L200) with the regular Z tank, you need the Z Series coils, not these. Don't be the person who buys the wrong pack and then gets frustrated because they won't fit. Check the top of your tank; if it doesn't say "Max," these aren't for you.

Maintenance: How to Not Kill Your Coils in One Day

We see it all the time—someone buys a fresh 5-pack of M series coils, pops one in, hits it at 80W instantly, and then complains it tastes like a burnt shoe. Don't do that.

1. Prime it properly: Drip a few drops of juice directly onto the white cotton windows on the side and a little bit down the middle before you install it.
2. The Wait: Once it’s in the tank and the tank is full, wait ten minutes. Go make a cuppa. Let the juice fully saturate that massive amount of cotton.
3. Start Low: If the coil is rated for 70–85W, start your mod at 50W. Take a few short puffs. Then 60W. Then 70W. Breaking it in slowly makes the coil last a week longer, easily.

Why Buy Your Geekvape Coils from VOS?

The UK market is flooded with "clone" coils that look exactly like the real thing but use cheap, nasty wire and industrial cotton. They burn out in a day and can be a proper health risk. At Vape Online Store (VOS), we only sell 100% genuine Geekvape stock. Every pack has a scratch-and-check code so you can verify it yourself. We’re vapers too, and we wouldn't sell you anything we wouldn't use ourselves. Plus, we ship fast across the UK, so you aren't left high and dry when your last coil gives up the ghost.

Frequently Asked Questions (FAQs)