Voopoo Drag E60 Vape Kit

Voopoo Drag E60 Vape Kit: A Compact 60W Pod Mod

Quick verdict: the Voopoo Drag E60 is a small, refillable pod mod with a built-in 2550mAh battery, adjustable power from 5W to 60W and a leather-and-zinc-alloy body. It uses a 2ml side-fill PnP II pod and VooPoo PnP mesh coils, and ships set up for an airy RDL or restricted DTL draw. Best for vapers who want a pocket-sized device with real power and control. Not ideal if you only ever want the simplest, tightest MTL pod with no settings.

The Drag E60 packs a lot into a compact shell. You get adjustable wattage, a smart mode that reads your coil, and an ECO mode that stretches the battery, all in a device that still slips into a pocket. It is a sensible step up for anyone who has outgrown a basic pod but does not want a bulky box mod.

Voopoo Drag E60 Specifications

Pick Your Draw: RDL or DTL, MTL Optional

With the 0.2Ω and 0.3Ω mesh coils it comes with, the Drag E60 runs as an airier RDL (restricted direct-to-lung) or DTL kit, giving more vapour and warmer flavour than a tight pod. Because it takes the wider VooPoo PnP coil range, you can fit a higher-resistance PnP coil and close the airflow down for a tighter, more cigarette-like MTL draw. The adjustable wattage and airflow let you tune the feel to the coil you fit.

Key Features

• 5W to 60W adjustable power so you match the output to the coil and your taste.
• Smart mode reads the fitted PnP coil and suggests a safe wattage.
• ECO mode lowers power draw to make the 2550mAh battery last longer.
• Side-fill PnP II pod for quick, mess-free refills.
• Compact zinc-alloy and leather build that feels solid without being bulky.

Coils and Pods: PnP Only

Get this part right and the kit is easy to live with. The Drag E60 uses the VooPoo PnP II pod and VooPoo PnP coils, shipping with 0.2Ω and 0.3Ω TW mesh coils. When flavour fades or you taste burning, drop in a fresh PnP coil and prime it first: add a few drops of e-liquid onto the coil cotton, fit it, fill the pod, then wait five to ten minutes before vaping. Replace the pod itself when it gets cloudy or starts to leak.

E-Liquid Pairing

Match your e-liquid to the coil. On the 0.2Ω and 0.3Ω mesh coils it comes with, use a higher-VG shortfill e-liquid at a low nicotine strength, around 3mg to 6mg, because these low-resistance coils make plenty of vapour. If you fit a higher-resistance PnP coil for a tighter MTL draw, switch to a 50/50 e-liquid or nicotine salt at a higher strength instead.

Battery, Coil Life and Running Cost

The 2550mAh battery is healthy for a compact pod mod and will see most vapers through a day, more if you use ECO mode. USB-C fast charging tops it back up quickly when you run low.

A PnP mesh coil usually lasts one to two weeks, less with dark, sweet e-liquids that gunk coils faster. Your running cost is a coil every week or two plus e-liquid, far cheaper than disposables and with full control over flavour and strength.

What's in the Box

• 1 x Voopoo Drag E60 device (2550mAh)
• 1 x PnP II pod (2ml)
• 1 x 0.3Ω PnP-TW30 mesh coil
• 1 x 0.2Ω PnP-TW20 mesh coil
• 1 x USB-C charging cable
• 1 x user manual

Stepping Up from a Simple Pod?

The Drag E60 is a natural next step if a basic pod feels too limited. You get adjustable power, swappable coils and a choice of draw, while keeping a device small enough to carry everywhere. The trade-off is honest: there is a little more to learn than a plug-and-puff pod, and you keep it running with coils, pods and e-liquid. If you would rather keep things as simple as possible, a straightforward vape starter kit may suit you better, or see the RDL vape kit range for more airy-draw options.

Voopoo Drag E60 FAQ

Which coils and pods does the Drag E60 use?

It uses the VooPoo PnP II pod and VooPoo PnP coils, shipping with 0.2Ω and 0.3Ω TW mesh coils. The wider PnP coil range fits too, so you can change the draw by fitting a different resistance. Check the pack says PnP before buying.

Is the Drag E60 MTL or DTL?

As supplied with its 0.2Ω and 0.3Ω coils it is an airier RDL or DTL kit. Fit a higher-resistance PnP coil and close the airflow down and it will do a tighter, more cigarette-like MTL draw instead, so one device covers both.

Is the battery built in or removable?

The 2550mAh battery is built in and charges over USB-C with fast charging. You do not need to buy a separate 18650 cell, which keeps the device compact and simple to run day to day.

What do Smart and ECO mode do?

Smart mode reads the fitted PnP coil and suggests a safe wattage, which is handy when you swap coils. ECO mode lowers the power draw to extend battery life, so you get more vaping time between charges.

How do I fill the Drag E60 pod?

It is side-fill. Open the fill port on the side of the pod and add your e-liquid, then close it. With a new coil, prime it first by adding a few drops to the cotton and letting it sit for five to ten minutes before vaping.

How long does the battery last?

The 2550mAh battery lasts most of a day for an average vaper, and longer in ECO mode. Higher wattage on low-resistance coils uses it faster, but USB-C fast charging gets you back up quickly.