{"product_id":"innokin-klypse-replacement-pods","title":"Innokin Klypse Replacement Pods","description":"\u003cp\u003eThree pods per pack. Refillable, side-fill, fixed mesh coil — when the coil's done, you swap the whole pod. The innokin klypse replacement pods are for the Klypse, Klypse Zip, and Klypse Mecha kits. If that's your device, you're in the right place.\u003c\/p\u003e\n\u003ch2\u003eIntroduction\u003c\/h2\u003e\n\u003cp\u003eNo coil to change separately. No cotton to re-wick. When the flavour starts going flat or the draw tastes off, the pod goes in the bin and a new one clicks in. That's the logic behind the innokin klypse replacement pods — the coil is built into the pod itself, so maintenance is just swapping the whole thing.\u003c\/p\u003e\n\u003cp\u003eEach pod holds 2ml of e-liquid, filled from the side via a silicone-stoppered port. The magnetic connection to the battery means it seats and removes cleanly — no wobble, no fiddling. Two coil options exist: 0.8Ω and 1.2Ω mesh. Both are MTL. The 0.8Ω is slightly more open, better for 50\/50 liquids and lower-strength nic salts. The 1.2Ω is tighter, pairs better with 20mg nic salt for a more concentrated, cigarette-close draw.\u003c\/p\u003e\n\u003cp\u003eWorth knowing — Innokin also makes the Klypse C1 pre-filled pods separately. These refillable innokin klypse replacement pods are a different product. If you want to choose your own e-liquid and strength, these are what you want. If you'd rather just click in a pre-filled pod without filling anything yourself, the C1s exist for that.\u003c\/p\u003e\n\u003ch2\u003eSpecs\u003c\/h2\u003e\n\u003cdiv style=\"overflow-x: auto;\"\u003e\n\u003ctable style=\"width: 100%; white-space: nowrap; height: 215.532px;\" width=\"100%\"\u003e\n\u003ctbody\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003e\u003cstrong\u003eSpecification\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003e\u003cstrong\u003eDetails\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003ePod Capacity\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003e2ml\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003eCoil Options\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003e0.8Ω Mesh \/ 1.2Ω Mesh\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003eCoil Type\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003eFixed (Integrated into pod)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003eFill System\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003eSide-Fill, Silicone Stopper\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003ePod Connection\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003eMagnetic\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003ePod Material\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003ePCTG\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003eDraw Style\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003eMTL\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003eRecommended E-Liquid\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003e50\/50 or High PG, Nic Salt\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003ePack Size\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003e3 Pods\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr style=\"height: 19.5938px;\"\u003e\n\u003ctd style=\"width: 39.2361%; height: 19.5938px;\"\u003eCompliance\u003c\/td\u003e\n\u003ctd style=\"width: 60.4167%; height: 19.5938px;\"\u003eUK TPD Compliant\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003c\/div\u003e\n\u003cp\u003eThe mesh coil inside each innokin klypse replacement pod heats e-liquid across a wider surface than a wire coil — that's why flavour is more consistent rather than thin and variable draw-to-draw. At constant 3.6V output from the Klypse battery, the coil isn't being pushed hard — which is part of why coil life on these pods is decent for the price. \u003c\/p\u003e\n\u003cp\u003ePCTG construction on the pod body is more impact-resistant than standard plastic. Doesn't shatter if you drop it before it's even fitted. Small thing, but worth noting.\u003c\/p\u003e\n\u003ch2\u003eWhat It Does Well\u003c\/h2\u003e\n\u003cul style=\"padding-left: 30px;\"\u003e\n\u003cli\u003eWhole-pod replacement — no coil swapping, no re-wicking, no tools\u003c\/li\u003e\n\u003cli\u003eSide-fill with silicone stopper — quick to fill, stopper keeps liquid in when carrying\u003c\/li\u003e\n\u003cli\u003eMagnetic connection — seats cleanly, no alignment fiddling\u003c\/li\u003e\n\u003cli\u003eTwo coil resistances — 0.8Ω for a slightly open MTL, 1.2Ω for tight cigarette-close draw\u003c\/li\u003e\n\u003cli\u003e3 pods per pack — enough to rotate without ordering constantly\u003c\/li\u003e\n\u003cli\u003eCompatible across three Klypse device variants\u003c\/li\u003e\n\u003cli\u003e50\/50 and nic salt compatible — works with what most UK vapers actually use\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFilling and Priming Your Pod\u003c\/h2\u003e\n\u003cp\u003ePull the silicone stopper out of the side-fill port — it stays attached, it doesn't come off completely. Fill slowly to the 2ml mark with your chosen e-liquid. Push the stopper back in firmly until it's flush. Then leave the pod sitting for ten minutes before you draw on it.\u003c\/p\u003e\n\u003cp\u003eTen minutes — not five, not two. The innokin klypse replacement pods use a fixed integrated coil with cotton wicking material that comes completely dry. E-liquid needs time to saturate cotton properly. Draw before it's ready and the heat hits dry or under-saturated wicking. That's a dry hit, and it scorches the cotton. Once cotton's scorched in a fixed-coil pod, there's no fixing it — that flavour is there for the rest of the pod's life.\u003c\/p\u003e\n\u003cp\u003eAfter priming, click the pod into the device — magnetic connection seats it with an audible click. Then just draw. The Klypse fires on inhale, no button.\u003c\/p\u003e\n\u003cp\u003eOne more thing. The side-fill stopper needs to be pushed fully back in before you put the device in a pocket — not halfway, flush. A partially seated stopper leaks. Not catastrophically, but enough to have liquid on your fingers every time you pull it out. Thirty seconds of care when filling sorts that entirely.\u003c\/p\u003e\n\u003ch2\u003eCompatibility\u003c\/h2\u003e\n\u003cp\u003eThe innokin klypse replacement pods are compatible with three devices — the Innokin Klypse, the Innokin Klypse Zip, and the Innokin Klypse Mecha. All three use the same pod format and magnetic connection.\u003c\/p\u003e\n\u003cp\u003eThey don't fit the Klypse Pro. That's a different device that uses Klypse 2.0 pods — 0.6Ω and 0.8Ω variants with a different connection. Similar name, different pod entirely. And the Klypse C1 pre-filled pods are also a separate format — those are single-use prefilled cartridges, not the same as these refillable innokin klypse replacement pods. Check the device name on your kit before ordering.\u003c\/p\u003e\n\u003ch2\u003eWhich Resistance to Choose\u003c\/h2\u003e\n\u003cp\u003eTwo options. The difference is real and worth picking deliberately rather than just grabbing whichever is in stock.\u003c\/p\u003e\n\u003cp\u003e0.8Ω Mesh — slightly more open draw for MTL. Better for 50\/50 e-liquids and lower-strength nic salts, say 10mg or below. Produces a bit more vapour than the 1.2Ω. If you've been on disposables or a loose MTL kit and want something in that territory, start here.\u003c\/p\u003e\n\u003cp\u003e1.2Ω Mesh — tighter draw, closer to a cigarette. Built for 20mg nic salt specifically — the combination of a restrictive draw and high-strength nic salt is what replicates the cigarette experience most closely. Less vapour, more focused nicotine delivery. If you're a recent ex-smoker, this is probably the right pod.\u003c\/p\u003e\n\u003ch2\u003eIn the Box\u003c\/h2\u003e\n\u003cp\u003e3 x Innokin Klypse Replacement Pods — coil pre-installed, empty and ready to fill. E-liquid not included.\u003c\/p\u003e\n\u003ch2\u003ePrice\u003c\/h2\u003e\n\u003cp\u003e£8.99 for three pods at VapeOnlineStore.co.uk. Fast UK delivery. Three pods per pack gives you rotation — use one, have two in reserve, reorder before the last one runs out rather than scrambling when you're on an empty pod. At £8.99 a pack of 3 that's a reasonable running cost for a daily carry kit.\u003c\/p\u003e\n\u003ch2\u003eFAQs\u003c\/h2\u003e\n\u003cdiv itemtype=\"https:\/\/schema.org\/FAQPage\" itemscope=\"\"\u003e\n\u003col style=\"padding-left: 30px;\"\u003e\n\u003cli itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003cstrong itemprop=\"name\"\u003eWhat are the Innokin Klypse replacement pods?\u003c\/strong\u003e \u003cspan itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e \u003cspan itemprop=\"text\"\u003e Refillable 2ml pods with a fixed integrated mesh coil — when the coil is done, the whole pod gets replaced. The innokin klypse replacement pods come in a 3-pack in either 0.8Ω or 1.2Ω coil resistance, side-fill via silicone stopper, magnetic connection to the device. \u003c\/span\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003cstrong itemprop=\"name\"\u003e0.8Ω or 1.2Ω — which one?\u003c\/strong\u003e \u003cspan itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e \u003cspan itemprop=\"text\"\u003e Depends on your draw preference and nicotine strength. The 0.8Ω innokin klypse replacement pods suit 50\/50 liquids and lower-strength nic salts — slightly more open MTL draw. The 1.2Ω is tighter, best with 20mg nic salt, closest to a cigarette feel. Ex-smokers typically do better on the 1.2Ω. \u003c\/span\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003cstrong itemprop=\"name\"\u003eWhich devices are these compatible with?\u003c\/strong\u003e \u003cspan itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e \u003cspan itemprop=\"text\"\u003e Innokin Klypse, Klypse Zip, and Klypse Mecha. Not the Klypse Pro — that uses a different pod format called Klypse 2.0. Not the Klypse C1 prefilled pods either — those are a separate product entirely. Check your device name before ordering innokin klypse replacement pods. \u003c\/span\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003cstrong itemprop=\"name\"\u003eWhy does my pod taste burnt after filling?\u003c\/strong\u003e \u003cspan itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e \u003cspan itemprop=\"text\"\u003e Didn't prime it long enough. After filling an innokin klypse replacement pod, leave it ten minutes before the first draw — longer than most pods need, but the wicking material is denser and needs more saturation time. Draw too early and you scorch the cotton. That taste won't leave. Replace the pod and give the next one the full ten minutes. \u003c\/span\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003cli itemtype=\"https:\/\/schema.org\/Question\" itemprop=\"mainEntity\" itemscope=\"\"\u003e\n\u003cstrong itemprop=\"name\"\u003eCan I use high-VG e-liquid?\u003c\/strong\u003e \u003cspan itemtype=\"https:\/\/schema.org\/Answer\" itemprop=\"acceptedAnswer\" itemscope=\"\"\u003e \u003cspan itemprop=\"text\"\u003e Not recommended. The innokin klypse replacement pods are designed for 50\/50 or high-PG e-liquids, and nic salts. High-VG liquids above 70% are too thick — they won't wick fast enough through the side-fill system and you'll get dry hits even with proper priming. Stick to 50\/50 or nic salt for consistent performance. \u003c\/span\u003e \u003c\/span\u003e\n\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003c\/div\u003e","brand":"Innokin","offers":[{"title":"0.6 ohm","offer_id":47411923452153,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"0.8 ohm","offer_id":47411923484921,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true},{"title":"1.2 ohm","offer_id":47411923517689,"sku":null,"price":8.99,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0652\/2630\/9881\/files\/Innokin_Klypse_Replacement_Pods_-_0.6_ohm.png?v=1771697264","url":"https:\/\/vapeonlinestore.co.uk\/products\/innokin-klypse-replacement-pods","provider":"Vape Online Store","version":"1.0","type":"link"}